Ensure Accurate Ultra Sound Inspections

Traditionally an inspector is left to trace the seams around the panels of the assets and change their positioning of the airborne module when something is heard to try and see if they can a higher intensity of the emission and can’t always achieve the Critical Angle due to diffraction of the sound wave and makes it tough recording the truest sound of the anomaly. The VP-12-US helps to insure the truest form of the emission can be record with minimal Diffraction and are more effective than scanning the seam on enclosed systems and for hermetically sealed cabinets.

Features

Environmentally Sealed Design

The VP-12-US Series of products are constructed from switchgear grade Nylon plastic with an aluminum cover and stainless steel mounting screws. Seamless custom gaskets ensure the NEMA4 / IP65 ingress protection rating is maintained.

Proudly Made in the United States

IRISS manufactures and assembles all products at our global headquarters located in Bradenton, FL.

Protected by our Unconditional Lifetime Warranty

The IRISS Unconditional lifetime warranty is unique in the IR industry as it not only applies not only to the workmanship of the window housing but also applies to the durability and stability of the optic in the proposed environment. No other manufacturer can offer this because crystal optics will fail over time, and are only able to at best offer a limited lifetime warranty for manufacturing defects.

Specifications

ModelVP-12-US
General Specifications
NEMA Enviroment TypeIP65 / NEMA 4
Voltage RangeAny
Operating Temperature-40°C (-40°F) to 325°C (617°F)
Body and Cover MaterialUL 94 5VA Nylon (switchgear-grade plastic); -40°C (-40°F)to 273°C (523°F); aluminum cover
Hardware316 Stainless Steel
GasketsUL 94 5VA TPE; -40°C (-40°F) to 273°C (523°F)
Dimension Specifications
Backplate Grill MaterialUL 94 5VA Nylon (switchgear-grade plastic) Grill (IP22/ IP2x Standard)
Port Dimensions1.2 cm (0.5 in) Ø
Overall Dimensions6.5 cm (2.6 in) Ø
Overall Thickness2.6 cm (1.0 in)
Inspection Capabilities and Applications
UltrasoundYes
Medium/High Voltage ApplicationsYes
Outdoor ApplicationsYes
Ratings and Testing
UL 50V & UL 50EStandard for Infrared Viewports & the environmental ratings , which apply to enclosures.
UL 746C & UL 746A-2012Impact and flame resistance standards for polymeric components.
UL 1558Impact and load resistance for low voltage, metal enclosed assemblies.
UL 508A/ ANSI 508AIndustrial Control Panel Standards.
CSA C22.2 No. 14-13CSA Standard for Industrial Control Equipment
CSA C22.2 No. 14-10CSA Standard for Low Voltage Distribution and Control Equipment
CSA C22.2 No. 94-M91This Standard applies to special purpose enclosures for electrical equipment intended to be installed
CSA C22.2 No. 94.1-07This Standard applies to special purpose enclosures for electrical equipment intended to be installed and used in non-hazardous locations.
CSA C22.2 No. 94.2-07Standard applies to Enclosures for Electrical Equipment, Environmental Considerations.
IEEE C37.20.7 Type 2BDefines switchgear arc resistance from the front, sides and rear. Type B specifies arc resistance is maintained, even when opening designated, low voltage equipment.
IEC 62271-200Specification equirements for pre-fabricated metal enclosed switchgear and control gear above 1 kV and through 52 kV. Enclosures may include fixed and removeable components and have various insulating properties.
IEC 60068-2-6:2007Environmental testing- Vibration.
IEC 60068-2-3Environmental testing- Damp heat, steady state.
IEC 60068-2-78:2012Environmental testing- Extreme humidity withstand.
American Bureau of Shipping (ABS)A classification society, with a mission to promote the security of life, property and the environment through desin verifications standards for marine related operations.
DNV P261.1E Maritime, Vessel & OffshoreA global quality assurance and risk management company that provides classifications and design validations to products used in the maritime, vessel and offshore industries.
Lloyds of London Type ApprovalLR provides independent approval certificates, validating a product’s confirmity within specific standards and specifications. It also validates quality production by design reviews, site audits and type testing.
Other
WarrantyUnconditional Lifetime Warranty

Recommended products

VPFC Series

VPT Series

VP-12-IR

CAP-CT-PDS Series

Follow IRISS