Durable and Rugged
Polymer based IR windows are far more able to resist the mechanical stresses applied to IR window that are fitted to electrical distribution equipment. It was IRISS that first came to market with industrial grade IR windows that could meet the mandatory impact and load testing requirements of UL, CSA, IEEE, IEC, CE testing that could never be passed by any crystal based IR window.
Any Camera – Any Task
The exclusive industrial-grade, reinforced polymer optic allows any thermographic camera to monitor completely undisturbed assets inside electrical equipment. The IRISS Polymer optics work with all ranges of Infrared, Ultraviolet and Visual Inspection Cameras.
Tested and Certified to The Highest Industry Standards
IRISS IR windows are the most certified windows in the industry with IEEE (impact & load), UL, cUL, Lloyds, CSA 22.2 14-13 for industrial control equipment. Our marine certifications are Lloyds, DNV and ABS (American Bureau of Shipping) credentials. IRISS IR windows are also arc tested to IEC 62271-200 Arc Flash Spec test 1.1 Second Duration, IEC 60262271-200: 63kA, IEC 60298 Appendix: 63kA, IEEE C37.20.7 Type 2B: 63kA.
Features
Environmentally Sealed Design
The VP-12-IR Series of products are constructed from switchgear grade Nylon plastic with an aluminum cover and stainless steel mounting screws. Seamless custom gaskets ensure the NEMA4 / IP65 ingress protection rating is maintained.
Proudly Made in the United States
IRISS manufactures and assembles all products at our global headquarters located in Bradenton, FL.
Protected by our Unconditional Lifetime Warranty
The IRISS Unconditional lifetime warranty is unique in the IR industry as it not only applies not only to the workmanship of the window housing but also applies to the durability and stability of the optic in the proposed environment. No other manufacturer can offer this because crystal optics will fail over time, and are only able to at best offer a limited lifetime warranty for manufacturing defects.
Specifications
| Model | VP-12-IR | ||||
|---|---|---|---|---|---|
| General Specifications | |||||
| NEMA Enviroment Type | IP65 / NEMA 4 | ||||
| Voltage Range | Any | ||||
| Operating Temperature | -40°C (-40°F) to 325°C (617°F) | ||||
| Body and Cover Material | UL 94 5VA Nylon (switchgear-grade plastic); -40°C (-40°F)to 273°C (523°F); aluminum cover | ||||
| Hardware | 316 Stainless Steel | ||||
| Gaskets | UL 94 5VA TPE; -40°C (-40°F) to 273°C (523°F) | ||||
| Dimension and Optic Specifications | |||||
| Optic Material | UL 746 compliant, visual, UV and IR transmissive polymer; -40°C (-40°F) to 325°C (617°F) | ||||
| Viewing Aperture Dimensions | 1.2 cm (0.5 in) Ø | ||||
| Overall Dimensions | 6.5 cm (2.6 in) Ø | ||||
| Overall Thickness | 2.6 cm (1.0 in) | ||||
| Inspection Capabilities and Applications | |||||
| Midwave IR | Yes | ||||
| Longwave IR | Yes | ||||
| Ultraviolet (UV) | Yes | ||||
| Medium/High Voltage Applications | Yes | ||||
| Outdoor Applications | Yes | ||||
| Ratings and Testing | |||||
| UL 50V & UL 50E | Standard for Infrared Viewports & the environmental ratings , which apply to enclosures. | ||||
| UL 746C & UL 746A-2012 | Impact and flame resistance standards for polymeric components. | ||||
| UL 1558 | Impact and load resistance for low voltage, metal enclosed assemblies. | ||||
| UL 508A/ ANSI 508A | Industrial Control Panel Standards. | ||||
| CSA C22.2 No. 14-13 | CSA Standard for Industrial Control Equipment | ||||
| CSA C22.2 No. 14-10 | CSA Standard for Low Voltage Distribution and Control Equipment | ||||
| CSA C22.2 No. 94-M91 | This Standard applies to special purpose enclosures for electrical equipment intended to be installed | ||||
| CSA C22.2 No. 94.1-07 | This Standard applies to special purpose enclosures for electrical equipment intended to be installed and used in non-hazardous locations. | ||||
| CSA C22.2 No. 94.2-07 | Standard applies to Enclosures for Electrical Equipment, Environmental Considerations. | ||||
| IEEE C37.20.7 Type 2B | Defines switchgear arc resistance from the front, sides and rear. Type B specifies arc resistance is maintained, even when opening designated, low voltage equipment. | ||||
| IEC 62271-200 | Specification equirements for pre-fabricated metal enclosed switchgear and control gear above 1 kV and through 52 kV. Enclosures may include fixed and removeable components and have various insulating properties. | ||||
| IEC 60068-2-6:2007 | Environmental testing- Vibration. | ||||
| IEC 60068-2-3 | Environmental testing- Damp heat, steady state. | ||||
| IEC 60068-2-78:2012 | Environmental testing- Extreme humidity withstand. | ||||
| American Bureau of Shipping (ABS) | A classification society, with a mission to promote the security of life, property and the environment through desin verifications standards for marine related operations. | ||||
| DNV P261.1E Maritime, Vessel & Offshore | A global quality assurance and risk management company that provides classifications and design validations to products used in the maritime, vessel and offshore industries. | ||||
| Lloyds of London Type Approval | LR provides independent approval certificates, validating a product’s confirmity within specific standards and specifications. It also validates quality production by design reviews, site audits and type testing. | ||||
| Other | |||||
| Warranty | Unconditional Lifetime Warranty | ||||
Product Documents
Recommended products
VP Series
[ASL_STORELOCATOR category=””]
© Copyright IRISS 2018 Privacy Policy
