For Safer Wireless Temperature Inspections
The Delta-T Alert™ sensors and controllers come pre-loaded with the necessary software. Additionally, the controllers are also shipped with a copy of the license-free dashboard software that is easily installed on your local computer (or server). Once the dashboard software is installed and the sensors are turned on, you can easily configure and program them to your desired specifications from your dashboard. The system keeps track of all your data reported and makes this data available in easy to use reporting software. You can compare the temperature data from similar devices, look that the historical readings from a particular device, or even create a trend analysis to track the changes in temperature over time.
Features
Automated Status Reporting
Settings allow an administrator to automate status updates on an hourly interval determined by the user. Designated staff will receive reports showing the systems current status for each sensor, battery levels, alarm indicators, and sensor monitoring levels.
Alarm Notifications
Designated staff can be set to receive a wide range of alarm notifications based on sensor by sensor settings. These alarms range from connection issues to critical and elevated alarms along with battery levels. Alarm thresholds can be set independently with each sensor along with audible alarm and critical reporting thresholds.
Sensor Trending Data
Monitor the trend data obtained from your sensors multiple monitoring components. Trending data can be scaled by time to reveal typical equipment and environmental patterns to reveal potential faults and react before failure.
Critical Monitoring
Sensors can be calibrated with sensor by sensor critical temperature thresholds, allowing the sensor to remain in sleep mode until the threshold is exceeded and activating the sensors minute by minute critical reporting providing a 24 hour monitoring system while conserving battery during standard operations.
Reporting
Generate sensor data reports into an excel or pdf format for review and analysis or for import into your BMS system.
Rapid Setup
The Delta-T Alert system sets up quickly and easily without high level networking requirements. Simply plug your Delta T Alert gateway into the same local network as your designated computer running the Delta T Software and you can begin adding gateways and sensors immediately.
Regenerative Networking
Even with every redundancy, computers crash, batteries fail, and networks are reset. On launch, the Delta T Alert system will scan your local network automatically and will appropriate lost gateways and sensors to your newly launched system. In the case of a failed computer, installations of the software can be cloned and moved to new machines where the software will re-connect to its former gateways without additional network changes.
Specifications
| System Requirements | |||||
| Operating System | Windows XP | Windows 7 or Higher | |||
| Processor Speed | 500 MHz | 1 GHz | |||
| RAM | 1 GB | 2 GB | |||
| Free Hard Disk Space | 5 GB | 10 GB | |||
| Display Resolution | 800 x 600 | 800 x 600 or Higher | |||
