For Square IR Window Inspections
The CAP-ENV features a reinforced environmentally sealed door design while also providing the largest visually clear infrared (IR) transmissive viewing area available on the market today. The exclusive reinforced polymer system allows any thermography camera to monitor completely undisturbed assets inside energized electrical equipment in the visual, UV and shortwave, midwave and longwave IR spectra. The larger rectangular viewing area provides an unparalleled field of view when compared to traditional round IR windows. Constructed completely from stainless steel, the CAP-ENV series is recommended for outdoor applications.
Unparalleled Field of View
Unlike the round infrared windows the large format IRISS CAP series and custom infrared windows have a far superior field of view. The CAP-ENV series has over 6 times the FOV of a 4 inch diameter round window which give the thermographer the ability of infinite viewing angles inside the switchgear. Reducing the number of infrared windows needed typically reduces the cost of the installation and product purchases required by over 50%.
Fixed and Stable Transmission
Polymer based infrared windows are unaffected by the environmental and mechanical stresses that degrade the transmission of crystal based IR windows which are fragile and hygroscopic (even when coated). The polymer IR window systems will maintain fixed and stable transmission (FAST) for the life of the installation ensuring that the temperature data collected through the IR window is accurate and reliable for the whole life of the installation.
Arc Containment Tested
The CAP-ENV Series was successfully tested to the IEC 62271-200 standard for arc containment on metal enclosed switchgear assemblies. In addition, the CAP-ENV Series have been used extensively by OEMs in UL Arc Resistant switchgear designs and have successfully passed every Arc Resistant type test to which they have been subjected.
There is no such thing as a standard IR inspection so why should there only be a standard IR Window? IRISS is the only IR window manufacturer with solutions for unique applications. The patented IRISS reinforced optic is flexible and can be manufactured in an infinite number of shapes and sizes ensuring that the CAP-ENV Series IR window meets your needs and applications.
Tested and Certified to The Highest Industry Standards
IRISS IR windows are the most certified windows in the industry with IEEE (impact & load), UL, cUL, Lloyds, CSA 22.2 14-13 for industrial control equipment. Our marine certifications are Lloyds, DNV and ABS (American Bureau of Shipping) credentials. IRISS IR windows are also arc tested to IEC 62271-200 Arc Flash Spec test 1.1 Second Duration, IEC 60262271-200: 63kA, IEC 60298 Appendix: 63kA, IEEE C37.20.7 Type 2B: 63kA
E Sentry Connect Asset Management
The E Sentry Connect ™ is our next generation intuitive asset information tagging system. The E Sentry Connect system utilizes Near Field Communication (NFC) contactless Smart Card technology that allows smart phone devices with NFC to easily access critical data relating to the equipment being inspected and save up-to-date inspection data directly to the assets E Sentry Connect tag via a free App from IRISS.
Reinforced Environmentally Sealed Design
The CAP-ENV Series of products are constructed from stainless steel with a double thickness welded enclosure door and all stainless steel mounting hardware. Machine formed corners and heavy duty seamless gaskets ensure the highest possible NEMA6 / IP67 ingress protection rating is maintained.
Durable and Rugged
Polymer based IR windows are far more able to resist the mechanical stresses applied to IR window that are fitted to electrical distribution equipment. It was IRISS that first came to market with industrial grade IR windows that could meet the mandatory impact and load testing requirements of UL, CSA, IEEE, IEC, CE testing that could never be passed by any crystal based IR window.
Proudly Made in the United States
IRISS manufactures and assembles all products at our global headquarters located in Bradenton, FL.
Protected by our Unconditional Lifetime Warranty
The IRISS Unconditional lifetime warranty is unique in the IR industry as it not only applies not only to the workmanship of the window housing but also applies to the durability and stability of the optic in the proposed environment. No other manufacturer can offer this because crystal optics will fail over time, and are only able to at best offer a limited lifetime warranty for manufacturing defects.
|NEMA Enviroment Type||IP67 / NEMA 6|
|Operating Temperature||-40°C (-40°F) to 325°C (617°F)|
|Body and Cover Material||Powder Coated 5052 Aluminum|
|Hardware||316 Stainless Steel|
|Gaskets||UL 94 5VA TPE; -40°C (-40°F) to 273°C (523°F)|
|Dimension and Optic Specifications|
|Optic Material||UL 746 compliant, visual, UV and IR transmissive polymer; -40°C (-40°F) to 325°C (617°F)|
|Optic Reinforcing Grill Material||Stainless Steel Reinforcing Grill (IP22/ IP2x Standard)|
|Viewing Aperture Dimensions||L= 9.68 cm (3.81 in)|
H= 9.77 cm (3.85 in)
|L= 9.1 cm (3.6 in)|
H= 15 cm (5.9 in)
|L= 23.6 cm (9.3 in)|
H= 12.7 cm (5.0 in)
|L= 39 cm (15.4 in)|
H= 15 cm (5.9 in)
|L= 53 cm (20.9 in)|
H= 15 cm (5.9 in)
|Overall Dimensions||L= 15.24 cm (6 in)|
H= 15.24 cm (6 in)
|L= 16 cm (6.3 in)|
H= 21.8 cm (8.6 in)
|L= 30.5 cm (12.0 in)|
H= 20.6 cm (8.1 in)
|L= 45.7 cm (20.9 in)|
H= 21.8 cm (8.6 in)
|L= 61 cm (24.0 in)|
H= 21.8 cm (8.6 in)
|Inspection Capabilities and Applications|
|Medium/High Voltage Applications||Yes|
|Ratings and Testing|
|UL 50V & UL 50E||Standard for Infrared Viewports & the environmental ratings , which apply to enclosures.|
|UL 746C & UL 746A-2012||Impact and flame resistance standards for polymeric components.|
|UL 1558||Impact and load resistance for low voltage, metal enclosed assemblies.|
|UL 508A/ ANSI 508A||Industrial Control Panel Standards.|
|CSA C22.2 No. 14-13||CSA Standard for Industrial Control Equipment|
|CSA C22.2 No. 14-10||CSA Standard for Low Voltage Distribution and Control Equipment|
|CSA C22.2 No. 94-M91||This Standard applies to special purpose enclosures for electrical equipment intended to be installed|
|CSA C22.2 No. 94.1-07||This Standard applies to special purpose enclosures for electrical equipment intended to be installed and used in non-hazardous locations.|
|CSA C22.2 No. 94.2-07||Standard applies to Enclosures for Electrical Equipment, Environmental Considerations.|
|IEEE C37.20.7 Type 2B||Defines switchgear arc resistance from the front, sides and rear. Type B specifies arc resistance is maintained, even when opening designated, low voltage equipment.|
|IEEE C37 20.2.a.3.6||IR windows mounted in medium and high voltage, metal clad and station-type gear are required to withstand impact and load from all sides without cracking, shattering or dislodging.|
|IEC 62271-200||Specification equirements for pre-fabricated metal enclosed switchgear and control gear above 1 kV and through 52 kV. Enclosures may include fixed and removeable components and have various insulating properties.|
|IEC 60262271-200||Arc containment tested; Arc Flash Spectest: 1.1 sec duration at 63kA.|
|IEC 60068-2-6:2007||Environmental testing- Vibration.|
|IEC 60068-2-3||Environmental testing- Damp heat, steady state.|
|IEC 60068-2-78:2012||Environmental testing- Extreme humidity withstand.|
|American Bureau of Shipping (ABS)||A classification society, with a mission to promote the security of life, property and the environment through desin verifications standards for marine related operations.|
|DNV P261.1E Maritime, Vessel & Offshore||A global quality assurance and risk management company that provides classifications and design validations to products used in the maritime, vessel and offshore industries.|
|Lloyds of London Type Approval||LR provides independent approval certificates, validating a product’s confirmity within specific standards and specifications. It also validates quality production by design reviews, site audits and type testing.|
|Warranty||Unconditional Lifetime Warranty|