CAP-ENV-PDThe CAP-ENV-PD features a reinforced environmentally sealed door design while also providing the largest visually clear infrared *(IR) transmissive viewing area available on the market today. The exclusive pharmaceutical-grade reinforced Poly-View-System polymer allows any thermography camera to monitor completely undisturbed assets inside energized electrical equipment in the visual, UV and shortwave, midwave and longwave IR spectrums.
The Toughest and Most Reliable Infrared Window in The World
|Window Housing and Cover||Standard product constructed of Stainless Steel; custom materials available|
|Optic||UL 746 compliant, visual, UV and IR transmissive polymer; -40°C (-40°F) to 325°C (617°F)|
|Gaskets||UL 94 5VA TPE; -40°C (-40°F) to 273°C (523°F)|
|Hardware||316 stainless steel|
|Useful Temperature Rating||-40°C (-40°F) to 200°C (392°F)|
|Water and Dust Ingress||IP65 / NEMA 4|
|Model||Window Dimensions||Overall Dimensions|
|CAP-ENV-PD-4||A= 9.68 cm (3.81 in), B= 9.77 cm (3.85 in)||C= 15.23 cm (6 in), D= 15.24 cm (6 in)|
|CAP-ENV-PD-6||A= 9.1 cm (3.6 in), B= 15 cm (5.9 in)||C= 16 cm (6.3 in), D= 21.8 cm (8.6 in)|
|CAP-ENV-PD-12||A= 23.6 cm (9.3 in), B= 12.7 cm (5.0 in)||C= 30.5 cm (12.0 in), D= 20.6 cm (8.1 in)|
|CAP-ENV-24||A= 53 cm (20.9 in), B= 15 cm (5.9 in)||C= 61 cm (24.0 in), D= 21.8 cm (8.6 in)|
Tested and Certified to The Highest Industry Standards
IRISS IR windows are the most certified windows in the industry with IEEE (impact & load), UL, cUL, Lloyds and CSA C22.2 14-13 for industrial control equipment Check out this product certifications!
UL 50V applies to infrared windows and is more of a classification than a standard that applies for performance-of-build characteristics.
IEEE C37 20.2a.3.6
The IEEE C37 20.2 Section 3.6 is the impact and load requirement for all viewing panes installed on medium and high voltage switchgear. Panes made from crystal of glass will not pass these requirements.
UL 50E standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations.
CSA C22.2 No. 14-10
Canadian Standards Association shows that a product has been independently tested and certified to meet recognizable standards for safety and performance.
Sets the impact & flammability standards for polymer materials used in electrical equipment to 1500 volts. Plastic/polymer parts of an IR window must pass flammability tests at room temperature & remain intact during an impact test performed at 0°C (32°F).
Enclosures for indoor/outdoor use to provide protection against incidental contact with enclosed equipment; provides protection against falling dirt, hose-directed water and the entry of water during temporary submersion; and will be undamaged by formation of ice on the enclosure.
Requirement covers metal-enclosed, low-voltage power circuit breaker switchgear assemblies containing but not limited to low-voltage power circuit breakers, switches, control, instrumentation and metering, protective and regulating equipment.
Lloyd’s of London
Lloyd’s provides independent, third-party approval certificates attesting to a product’s conformity with specific standards or specifications. It verifies the manufacturer’s production quality systems through a combination of design reviews and type testing.
UL 508 & 508A
UL 508 and UL 508A are classification for the components used on electrical panels. UL 746C is a standard requiring flammability and impact tests for polymeric materials used on electrical equipment.
The CE marking is the manufacturer’s declaration that the product meets the requirements of the applicable EC directives.
Withstood a controlled arc flash test using 1kV to 50kV metal enclosed switchgear to a voltage of 6kV using a current of 31.5KA for a duration of 1.1 seconds exceeding specifications by over 200% and withstanding a pressure of 18 bar.
American Burea of Shipping
An ABS assessment is the pre-approval of a product for use on a variety of ABS- classed ships following a technical evaluation. Ship designers, builders and owners can select the product to be placed aboard and ABS-classed vessel.