CAP-CT SeriesSurpassing even the original industrial-grade CAP Series, the CAP-CT Series has the largest visually clear infrared (IR) transmissive viewing area available. The exclusive pharmaceutical-grade reinforced Poly-View System™ polymer allows any thermography camera to monitor completely undisturbed assets inside energized electrical equipment in the visual, UV and shortwave, midwave and longwave IR spectrums. The larger rectangular viewing area provides an unparalleled field of view when compared to traditional round IR windows. The CAP-CT offers locking covers for your IR window. These are useful in areas of high traffic and protect the IR viewing panes from impacts, flying debris and dust.
Safest, Easiest and Most Efficient IR/Visual Inspections Available
|Window Housing and Cover||Standard product constructed of aluminum; custom materials available|
|Optic||UL 746 compliant, visual, UV and IR transmissive polymer; -40°C (-40°F) to 325°C (617°F)|
|Gaskets||UL 94 5VA TPE; -40°C (-40°F) to 273°C (523°F)|
|Hardware||316 stainless steel|
|Useful Temperature Rating||-40°C (-40°F) to 200°C (392°F)|
|Water and Dust Ingress||IP65 / NEMA 4|
|Model||Window Dimensions||Overall Dimensions|
|CAP-CT-4, CAP-CT-4||A= 9.68 cm (3.81 in), B= 9.77 cm (3.85 in)||C= 15.23 cm (6 in), D= 15.24 cm (6 in)|
|CAP-CT-6, CAP-CT-6||A= 9.1 cm (3.6 in), B= 15 cm (5.9 in)||C= 16 cm (6.3 in), D= 21.8 cm (8.6 in)|
|CAP-CT-12, CAP-CT-12||A= 23.6 cm (9.3 in), B= 12.7 cm (5.0 in)||C= 30.5 cm (12.0 in), D= 20.6 cm (8.1 in)|
|CAP-CT-24, CAP-CT-24||A= 53 cm (20.9 in), B= 15 cm (5.9 in)||C= 61 cm (24.0 in), D= 21.8 cm (8.6 in)|
Tested and Certified to The Highest Industry Standards
IRISS IR windows are the most certified windows in the industry with IEEE (impact & load), UL, cUL, Lloyds and CSA C22.2 14-13 for industrial control equipment Check out this product certifications!
UL 50V applies to infrared windows and is more of a classification than a standard that applies for performance-of-build characteristics.
IEEE C37 20.2a.3.6
The IEEE C37 20.2 Section 3.6 is the impact and load requirement for all viewing panes installed on medium and high voltage switchgear. Panes made from crystal of glass will not pass these requirements.
UL 508 & 508A
UL 508 and UL 508A are classification for the components used on electrical panels. UL 746C is a standard requiring flammability and impact tests for polymeric materials used on electrical equipment.
These equivalent ratings certify enclosures for indoor or outdoor use. They protect against access to hazardous parts, ingress of foreign objects and water from rain, sleet, snow, splashing or hose directed water & ice formation damage.
UL 50E standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations.
Lloyd’s of London
Lloyd’s provides independent, third-party approval certificates attesting to a product’s conformity with specific standards or specifications. It verifies the manufacturer’s production quality systems through a combination of design reviews and type testing.
Requirement covers metal-enclosed, low-voltage power circuit breaker switchgear assemblies containing but not limited to low-voltage power circuit breakers, switches, control, instrumentation and metering, protective and regulating equipment.
American Burea of Shipping
An ABS assessment is the pre-approval of a product for use on a variety of ABS- classed ships following a technical evaluation. Ship designers, builders and owners can select the product to be placed aboard and ABS-classed vessel.
Sets the impact & flammability standards for polymer materials used in electrical equipment to 1500 volts. Plastic/polymer parts of an IR window must pass flammability tests at room temperature & remain intact during an impact test performed at 0°C (32°F).
IEC Vibration & Humidity
Certified IRISS IR Windows experienced no obvious signs of damage due to vibration or extream humidity when put under IEC testing conditions for IEC 60068-2-6, 60068-2-3, and 60068-2-78.
DNV Certification is awarded for marine and offshore applications and allows preventative maintenance on electrical equipment in these vertical markets. DNV covers Rules for Classification of Ships and Offshore Standards (vessels, tankers, military and cruise ships, and oil drilling riggs).