The FlexIR CAP-B Series for non-segmented bus bar systems is a large format combination infrared, visual and ultraviolet inspection window specifically designed for the power generation and large power user market. The bolted window design also acts as an access port for repairs as it can be easily removed to allow the engineer access to repair the fault. Once refitted, the bus bar system can be re-energized and the repaired joint can be inspected to confirm that the repair was effective.

Infrared Inspection and Service Access Panels for non-segmented bus bar

  • Versatile & Durable

    Environmentally Durable Design for Indoor and Outdoor Settings Top Industry Materials Nuclear-Grade Gaskets & Stainless Steel Fastners.

  • Accurate Measurements

    Identifies an Exact Point of Failure & Urgency Level Assessment with Direct Temperature Measurements, as well as Plans & Prepares Efficiently for Shutdown Minimizing Parts Cost & System Downtime Spent on Unnecessary Maintenance.

  • Sturdy Material

    Large Bolted Cover Design Provides Maintenance Access Point Most Certified & Tested Infrared Window Available .

Our Strong Points Ipad
  • Customizable

    Customizable to Any Size, Shape or Color Plus Private Label Proven compatibility with acids, alkalis, UV, moisture, humidity, vibration and high frequency noise.

  • Protected by our Unconditional Lifetime Warranty

    Unconditional lifetime warranty applies not only to the workmanship of the window housing but also applies to the durability and stability of the optic in the proposed environment.

  • Proudly Made in the United States

    IRISS manufactures and assembles all products at our global headquarters located in Bradenton, FL.

Tested and Certified to The Highest Industry Standards

IRISS IR windows are the most certified windows in the industry with IEEE (impact & load), UL, cUL, Lloyds and CSA C22.2 14-13 for industrial control equipment Check out this product certifications!

  • UL 50V

    UL 50V applies to infrared windows and is more of a classification than a standard that applies for performance-of-build characteristics.

  • Lloyd’s of London

    Lloyd’s provides independent, third-party approval certificates attesting to a product’s conformity with specific standards or specifications. It verifies the manufacturer’s production quality systems through a combination of design reviews and type testing.

  • UL 50E

    UL 50E standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations.

  • IEEE C37 20.2a.3.6

    The IEEE C37 20.2 Section 3.6 is the impact and load requirement for all viewing panes installed on medium and high voltage switchgear. Panes made from crystal of glass will not pass these requirements.

  • UL 1558

    Requirement covers metal-enclosed, low-voltage power circuit breaker switchgear assemblies containing but not limited to low-voltage power circuit breakers, switches, control, instrumentation and metering, protective and regulating equipment.

Don't see what you're looking for?

We specialize in custom solutions.
Click here to get started.

Request More Information

Request A Demo

Follow IRISS