Rugged & Versitile

Many applications in your facility may not be accessible to thermographers for “direct measurement;” or they may only be available for survey while not under full load. In either case, critical faults will “hide” easily. For this reason, the NFPA 70B standard for Electrical Preventive Maintenance recommends direct thermographic measurement whenever possible.

Direct measurement is now possible without the increased risk associated with removing covers or guards.  Because the patented IRISS reinforced optic is flexible it can be bent and manufactured in an infinite number of shapes and sizes, there is almost nothing that is off limits to thermographers anymore.

Consult with your IRISS representative to design a solution which will maintain a separation between personnel and energized components or sensitive processes. Comply with safety standards, while saving time and increasing accuracy of analysis and reports.

Protected by an Unconditional Lifetime Warranty.

Download Datasheet (PDF)

The Custom Application Panel (CAP) solution from IRISS was specifically designed to exceed the demands of the industrial and building maintenance community.  The window panes are impact resistant and maintain a stable transmission rate.

The CAP series uses the same patented design and construction as the VPFR industrial-grade viewing panes – the ONLY impact resistant IR windows on the market today.

• IEEE C37.20.2 (A.3.6)
• UL746C

Control Risk While Inspecting Power Distribution Panels (PDUs) 

Removing the covers from electrical panels or even mechanical gaurds from rotating equipment is a risky business. The IRISS CAP solutions allow thermographers to electrical connections, rotating joints or bearing caps while leaving the main covers in place. The result is a safer, faster and virtually risk-free inspection that can enable thermographers to catch otherwise hidden faults before they result in costly downtime.

Our clients are using the CAP Solutions extensively in a variety of applications, not just electrical inspections:

• Motor Commutator Block Inspection
• Transmissive panels for metal cladding in switchgear
• Mechanical guards
• Large area IR windows for applications that are close to the window
• Rotating Joints
• Bearings
• Virtually anything you need to inspect with an IR camera.....